Toytec BOSS 2.5 Aluma Series Performance Suspension System for 10+ 4Runner

$2,513.96

-

25BOSS-4R210P-ALM – Toytec BOSS Performance Suspension System Fits all 2010+ 4Runner

**Vehicle Fitment May Vary for KDSS(See Below)**

Description

Description
25BOSS-4R210P-ALM – Toytec BOSS Aluma Series 2.5 Performance Suspension System Fits all 2010-Current 4Runners

This suspension kit is designed with performance in mind.

25BOSS-4R210P-ALM Includes:

Front Coilovers:

  • Choose from Toytec Boss 2.5 Front Aluma Series IFP Coilovers or 2.5 Aluma Series with Remote Reservoirs (*note – Remote Reservoir option for vehicles without KDSS)
    • The shock bodies are made from hard anodized aluminum for cooler operation as well as better protection from the elements.
    • Adjustable from 2-3″ of lift
    • Internal hydraulic valving optimized to match the 700 lb rate spring for use with or without a bumper or winch.
    • Front coilovers are assembled and ready to bolt on.  No spring compressor or special tools needed for installation.
    • Shock bodies are 2.5″ in diameter providing additional oil over standard OEM shocks.
    • This kit includes sway bar relocation brackets, preload adjustment tool and owners manual.
    • This kit has a nitrogen charged design with internal floating piston to help prevent shock fading and cavitation
    • Heavy duty 19mm induction-hardened piston shaft.
    • These shocks are fully rebuildable
Sway Bar Relocation Brackets – Included for proper coilover clearance

Front Differential Drop kit – Recommended for all lifted 4x4s

Front Bump Stops:

  •  DuroBumps are proudly made in the USA with dual durometer (hardness) rubber that provides smooth progressive dampening and greatly reduces hard bottom outs. This allows for more control and comfort compared to OEM bump stops that are harsh on contact. With DuroBumps installed, the shell-shock effect experienced when hitting the OEM bump stops is completely eliminated.

Rear Bump Stop Options:

  • Toytec Rear Bump Stop Drop kit – Designed to work with our Superflex rear coils allowing your rear bump stops to function properly protecting your rear shocks from damage and keeping the rear tires from hitting the fenderwell.
  • DuroBumps  – DuroBumps 4.25″ rear bump stops are intended for vehicles that have rear lifts of 2″. Its heavy-duty Dual Durometer Rubber provides smooth progressive dampening and greatly reduces hard bottom outs. With DuroBumps, gain better off road control and comfort vs the harsh-on-contact OEM bump stops and eliminate the shell-shock effect experienced on hitting those larger bumps.
Rear Lift Options:
  • Toytec Rear Superflex Coils: – Our BOSS kits come standard with Toytec RCC2.0 rear springs- These springs offer 2″ of  lift with stock rear weight with the best overall ride quality and rear articulation.
  • Optional HD Rear Superflex coils offer additional weight capacity.  Recommended 150-200 lbs of constant load for 2-2.5″ of lift.

Rear Shocks Options:

  • FJBOSS25R-ALM – Toytec 2.5 Aluma Series IFP Rear Shocks. 
    • Perfectly matched to pair with the Boss Aluma Series Coilovers
    • Tuned for maximum performance and comfort.
    • Gas-pressurized design with internal floating piston to help prevent cavitation and fading
    • The shock bodies are 2.5″(56mm) made from hard anodized aluminum for cooler operation as well as better protection from the elements.
    • FJBOSS25R-ALM are completely rebuildable, serviceable and tunable.
  • LKFJ20R-P – Toytec 2.0 Aluma Series IFP Rear Shocks 
    • Similar to the 2.5 IFP Aluma shocks, but in a 2.0 Diameter.

Add Upper Control Arms to complete your 2010-Current 4Runner suspension kit (Recommended for use with Aluma Series Coilovers):

  • Total Chaos Uniball Upper Control arms – 96504 – Maximize your wheel travel and increase your strength while also correcting alignment angles.
  • SPC Adjustable Upper Control Arms – 25480 – The most adjustable UCA on the market. They correct your alignment angles and are also great to help with adjusting for tire clearance.
Tire/Wheel Fitment: 
  • OEM Wheels and Tires may require wheel spacers for proper fitment.
  • For Aftermarket Wheels, we recommend 8″-8.5″ Wide Wheels with 4.5″ to 4.75″ backspacing.

Vehicle Fitment:

  • 2010+ 4Runner 2WD/4WD.
  • If your vehicle has KDSS, choose the 2.5 coilover option, the Remote Reservoir Coilovers will not work with KDSS equipped vehicles.

 

Additional information

Weight 100.00 lbs
Dimensions 36.00 × 23.00 × 5.00 in
Front Diff Drop Kit

Included (For 4×4 models), 2wd No Diff Drop (-$29.00)

Aftermarket Uppler Control Arms

No Thanks I Dont Need Upper Control Arms, Add SPC/Light Racing Adjustable Upper Control Arms (+$485.91), Add Total Chaos Uniball Upper Control Arms (+$659.99)

Rear Coils

Toytec Superflex Rear Coils, Superflex HD Coils (+$10.00)

Vehicle Model

2010+ 4Runner or FJ Without KDSS, 2010+ 4Runner With KDSS

Reviews

There are no reviews yet.

Be the first to review “Toytec BOSS 2.5 Aluma Series Performance Suspension System for 10+ 4Runner”

Your email address will not be published. Required fields are marked *